Microbial membrane filtration system

C3 Membrane Filtration System (Patent)

Microbial Filtration applies to microbial test or other solutions which need to filter. It is made up of filtration device (filtration support +funnel) and vacuum pump. During using this product, place the membrane on the filter head, fixed and sealed it by pressing funnel to form an integrated filtration device. based on the principle of membrane filtration, separate the testing solution from microbe (or required particle material), and withholding the microbe or particle material on the membrane, transfer membrane. If do microbial limit test, culture it under the specified conditions, then colony count and observe.

By using the membrane filtration, the interference from antibacterial substances can be effectively eliminated in samples, and sampling amount can also be increased, leading to more accurate and reliable results compared with the plate method.

Feature
- Filter head is detachable, easy to sterilize key parts.
- Multi-head support can be controlled individually.
- Much bigger filtration area and much fast filtration rate.
- Accept 47mm and 50mm membrane.
- Filter head accept flame fast sterilization.
- Special groove in the filter head, easy to place /take off membrane.
- Filtration support can be moist heat sterilization.

Technical Parameter

Volume of PP Funnel: 270ml
Scale of Funnel: 50, 100, 150, 200, 250ml with annular scale line
Membrane Diameter: 47mm and 50mm
Effective filtration area: 12.5 cm²
W x H: 105mmx135mm
Material of Funnel: PP and Stainless Steel
Material of Support: Stainless Steel

Filter head: Detachable, screw it with holder
Filter head: 1-place, 2-place, 3-place, 6-place

SS funnel: SS100(100ml), SS250(300ml), SS500(500ml)

Diaphragm Vacuum Pump
Oil-Free Operation
Built-in Pressure and vacuum Gauge
Air exhaust Speed: 30L/min
Ultimate pressure vacuum:≥0.08Mpa
Overheating protection